Wir verwenden Cookies, um Ihre Erfahrung zu verbessern. Um die neuen Datenschutzrichtlinien zu erfüllen, müssen wir Sie um Ihre Zustimmung für Cookies fragen. Weitere Informationen
(8) 10/100/1000Base-T PoE++ ports + (2) 100/1000Base-X SFP slots 52V – 57 VDC (Din Rail Bracket included)
The SISPM1040-582-LRT is a managed PoE++ switch suitable for connecting and powering devices in hardened environments. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on (4) ports or 60 Watts per port on (8) ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Lantronix ’ hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.
Features
- Plenum UL certified
- IPv4/IPv6 dual protocols
- Supports Jumbo Frame up to 9K bytes
- Authentication – RADIUS, TACACS+
- DHCP Relay, DHCP Snooping, DHCPServer
- L2/L3/L4 ACLs Support MAC, VLAN ID, or IP address, protocol, per port
- LLDP (Link Layer Discovery Protocol)
- ITU-T G.8031 Ethernet Linear Protection
- ITU-T G.8032 Ethernet Ring Protection Switching
- Rapid Ring for fast recovery
- IEEE 802.3az Energy Efficiency
- IP Source Guard, Port Security
- Port Mirroring
- Syslog
PoE Features
- Compliant with IEEE 802.3bt PoE++
- Compliant with IEEE 802.3at PoE+
- Compliant with IEEE 802.3af PoE
- IEEE 802.1AB LLDP-MED Configuration
- PoE Configuration
- PoE Scheduling
- Power Delay
- Auto Power Reset
- DHCP per Port
- Always on PoE
Software Features
- Management: Web Management, SNMP V1/V2c/V3, SSH, CLI
- Port Trunk: Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP) and static trunk
- Multicast: Support IGMP Snooping V1/V2/V3, MVR, MLD Snooping V1/V2
- Quality of Service: Supports 8 hardware queues. Strict priority and WRR, Ingress policer, Egress shaping and per port rate control
- Spanning Tree: Supports IEEE 802.1s MSTP, IEEE 802.1w RSTP and IEEE 802.1D STP Compliant
- VLAN: Port Based VLAN, IEEE 802.1Q tag-based, up to 4k VLAN entries, QinQ, MAC-based VLAN, Management VLAN, Voice VLANs, and Private VLAN
- Firmware Update through TFTP and HTTP/HTTPs
- IEEE 802.3ah, IEEE 802.1ag, ITU-T Y.1731
- Support IEEE 1588 v2 PTP
- Media Redundancy Protocol (MRP)
- Static Routing
Device Management System
- Graphical Monitoring – Topology view, Floor view, Map view
- Traffic Monitoring
- Troubleshooting – Network Diagnostic, protection mechanism, performance and link management
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3z
- IEEE 802.3ae
- IEEE 802.3x
- IEEE 802.3ad
- IEEE 802.1D
- IEEE 802.1w
- IEEE 802.1s
- IEEE 802.1Q
- IEEE 802.1p
- IEEE 802.1ad
- IEEE 802.1AB
- IEEE 802.3af
- IEEE 802.3at
- IEEE 802.3bt
- IEEE 802.3ah
- IEEE 802.1ag
- IEEE 802.3az
- IEEE 1588 v2
- ITU-T Y.1731
- ITU-T G.8031
- ITU-T G.8032
- IEC62439-2
- CSMA/CD
- Store-and-forward switching architecture
- (8) 10/100/1000 Mbps RJ-45 ports
- (2) 100/1000 Mbps SFP slots
- (1) Console RJ-45 port
- 8K MAC address table
- 20 Gbps
- Rapid Ring Setting (2-Pin)
- Reset the switch, restore factory default
- 24VDC/1A
- Level 0 (Low): 0V to 6V
- Level 1 (High): 10V to 24V
- Width: 2.44” [62 mm]
- Depth: 5.12” [130 mm]
- Height: 5.31” [135 mm]
- 13 Watts (without PoE)
- 52 – 57VDC dual inputs Terminal Block
- Max PoE Budget 480 Watts
- 60 Watts for (8) ports simultaneously
- Up to 90 Watts on (4) ports simultaneously
- IP30
- Operating: -40°C to +75°C (DC input)
- 82,976 hours
- FCC Class A; CE; NEMA TS-2, UL 2043, UL 2108
- Safety: EN62368-1, UL62368-1
- IEC61850-3, IEEE 1613, Class 1 Div 2
- 5 Years
Standards
Protocols
Technology
Connectors
MAC Address
Backplane
DIP Switch
Reset Button
Digital Output (relay)
Digital Input
Dimensions
Power Consumption
Power Input
Power-over-Ethernet
Ingress Protection
Environment
MTBF
Certifications
Compliant*
Designed to Meet *Please contact sales with certification needs
Warranty
Lieferzeit | 5-10 Werktage |
---|---|
Systeme | Lantronix / Transition Networks |
Kategorie | Network Switches |
Medienobjekte |